There is a lot of meat at home, but there is no place to put it. What should I do? take it easy! Today, let’s walk into the creative DIY classroom and learn how to turn waste into treasure, so that you can make flowerpots without spending a penny!
Method 1
Step1. Take out the stones prepared in advance (the color and shape of the stones can be selected according to personal preference, and there is no mandatory requirement), put them on one side after classification (they can be classified according to the color of the stones), and then use cardboard for backing.
Step 2. Take out the plastic bag prepared in advance, take it as the bottom, and spread all the stones evenly.
Step3, the production of potted flower pots does not need any technical content, only you need to be careful and careful. If there is excess water in the production process, it can be wiped off with paper towel after it is slightly solidified.
Step4. After the base is stable, continue to build.
Step5. Take out a branch from the bucket tree and use it to make the base of the flowerpot.
Step 6. Place the potted flower pot and place it at room temperature to cool and solidify. This process takes about 24 hours.
STEP7. Transfer the potted plant into the flowerpot.
Method 2
First, prepare all kinds of materials and tools you need, including cans, paper towels, paint, hemp rope, etc.
The specific manufacturing steps are as follows:
Step1. Treat the cans, rinse them with clean water, and then use paper towels to dry the excess water.
Step 2. Punch holes at the bottom with tools, about five to eight holes. Note that the left and right sides of the can also need to be punched.
Step3. Take out the paint prepared in advance and brush one layer on the surface of the can. Of course, you can also choose to wrap the can body with gunny bags as decoration.
Step4. Just move the potted plants in.
Method 3
First, prepare all kinds of materials and tools you need, including egg shells, paper towels, bowls, etc.
Specific production steps? As follows:
Step 1: the eggshell is processed and a small hole is chiseled at the top or bottom of the eggshell with a tool,
Step 2. Pour the egg white and yolk into a clean bowl prepared in advance.
Step 3. Rinse the inside and outside of the egg shell with water for several times until it is completely clean, and then drain the water with paper towel.
Step 4. Fill the eggshell with soil and move the potted plants.
Step5. Punch holes on the side of the eggshell with the help of tools, only two holes are needed.
Step6. Take out the rope prepared in advance, make it pass through two holes and hang it.
Method 4
First, prepare all kinds of materials and tools you need, including waste light bulbs, pliers, wrenches, stones, soil, etc.
The specific manufacturing steps are as follows:
Step1. Dispose the waste light bulbs and unscrew the screws with a wrench.
Step 2. Take out the pliers prepared in advance, and pry the cover of the waste bulb with the pliers.
Step3. Continue to screw off the nut of the old bulb with the help of tools.
Step4. Take out the prepared soil and stones, place them at the bottom of the bulb, and then pour a small amount of water into the bulb.
Step5. Just move the potted plants in.
Method 5
First, prepare all kinds of materials and tools you need, including waste plastic bottles, waste cloth, hand bow saw, hemp rope, etc.
The specific manufacturing steps are as follows:
Step1. Take out the waste plastic bottle prepared in advance, and cut off the upper part of the bottle body with scissors.
Step 2. Take out the waste cloth prepared in advance and wrap the outside of the plastic bottle with it.
Step3. Cut the branches with an assistant bow saw to make the height of the branches consistent with the height of the waste plastic bottles.
Step4. With the help of hemp rope, connect the treated branches in series, and then enclose them in the outer layer of the bottle body.
Step5. Transfer to potted plants.
Have you learned all the five ways to make your own pot?
Leave a Reply